This set is designed for analog FPV flying with a powerful 5" drone. It is suitable for pilots who have mastered the basics of control in a simulator and want to move on to full-fledged 5“ freestyle and experience the biggest adrenaline rush FPV drones have to offer. The drone is built for outdoor acrobatic flying – in a meadow, field, near abandoned buildings (“bando”) or at a model airfield, always far from people and built-up areas. Thanks to GPS with automatic return to the take-off point, it is also suitable for calm scenic flights and, with a GoPro camera (sold separately) mounted on the included holder, for recording HD footage. It is not suitable for flying indoors or near people.
The set includes an assembled Axisflying Manta5 SE V2 DC drone with an ELRS receiver and GPS module, and Skyzone Cobra SD FPV goggles. It also includes three 6S batteries, a mains charger, a protective battery bag, a Li-ion cell for the goggles and spare propellers. An RC transmitter is not included in the set. The set assumes that the pilot already has a transmitter with the ELRS 2,4GHz protocol, such as the RadioMaster Pocket, Boxer or TX15 (sold separately). Before the first flight, the drone must be bound to the transmitter and switches for arming and flight modes must be configured. The goggles with 5,8GHz reception can later also be used with other drones with an analog video transmitter.
Manta5 SE V2 DC is a 5" freestyle drone in a Deadcat configuration, where the front arms are shifted further back so that the propeller edges are not visible in the FPV image. For greater durability, the arms are milled from 6mm carbon, plastic side plates protect the electronics from dirt, and the FPV camera is mounted in aluminum side plates on rubber inserts that minimize vibration transfer. The XT60 connector is firmly mounted at the rear of the frame. The drone includes a 3D-printed holder for a GoPro camera. It is based on the Argus ECO F722 stack. The flight controller uses an F722 processor, ICM42688-P gyro, DPS310 barometer for altitude measurement and 16MB memory for blackbox. The drone is equipped with an ELRS receiver at 2,4GHz and a GPS module hidden under the GoPro mount, enabling automatic return to the take-off point and displaying speed, distance and direction to the take-off point in the OSD. The ESCs have a continuous current rating of 60A and 32-bit firmware. Propulsion is provided by Axisflying AE2505 1750Kv motors combined with HQProp R29 propellers.
The image is captured by an analog camera with 1200TVL resolution, complemented by an Axisflying Smurfs V2 video transmitter with adjustable 25-1600mW output and a Prism V2 antenna. The drone package also includes an RHCP circularly polarized antenna. In the Czech Republic, the permitted video transmitter output in the 5,8GHz band is 25mW. Do not power on the video transmitter without an antenna connected.
Recommended batteries are 6S with a capacity of 1300-1800mAh and an XT60 connector. The set includes three CNHL SPD Pro 1500mAh 6S 150C batteries, manufactured in cooperation with Speedy Pizza Drones. They have a durable rubber casing instead of conventional shrink wrap and a shortened balance connector, making it less likely to get caught in the propellers. Each weighs 247g and can be charged at up to 5C. Charging is handled by the SkyRC S100neo charger with an integrated power supply, which is powered directly from mains power (100W output) or a 6-30V DC source, for example a car battery (200W output). It charges one battery at a time, supports 1-6S LiPo, LiHV and Li-ion batteries, and displays charging progress on a 1,77" color display. The batteries are carried in a Rotorama Lipo Safe bag made of non-flammable material, measuring 80x120x180mm and sized for 5" drone batteries. The set also includes two sets of spare Gemfan Vannystyle 5136-3 propellers for the drone.
The Skyzone Cobra SD FPV goggles are box goggles with an LCD display featuring 800x480 resolution, a 16:9 aspect ratio and a 50° field of view. The display is positioned in the upper part of the goggles and the image is projected through a mirror, so the goggles do not need a Fresnel lens and are more compact. An integrated fan prevents fogging. Reception is handled by a 48-channel diversity receiver in the 5,8GHz band with two antennas. The goggles support DVR recording to a microSD card up to 128GB (card not included), head tracking, AV input and output, and HDMI input. They are powered by one 18650 Li-ion cell, which charges directly in the goggles via USB-C. The goggles can also be powered by a 2-6S battery through a 5,5x2,1mm barrel connector. Their shape allows them to be worn over prescription glasses.
The set includes an EVE INR18650-35V 3500mAh Reclaimed cell for the goggles. Reclaimed means that the cell comes from battery packs with faulty welds, has never been charged or discharged, and has been tested for internal resistance. There may be traces of spot welding on the cell terminals.
Before your first flights with a 5" drone, we recommend practicing controls in an FPV simulator.
Guidelines for safe use of LiPo batteries · Guidelines for safe use of Li-ion batteries