Walksnail Avatar HD Micro kit
Discontinued
€ 134,79
The Walksnail Avatar Micro kit is a combination of a camera, video transmitter and antennas for the Walksnail Avatar digital system. Walksnail Avatar enables video transmission in full HD (1080p) or HD (720p) quality with a low latency of even 22ms and a high refresh rate of 60/120fps and a data throughput of 25/50mbps. The Walksnail Avatar system supports the so-called Canvas mode, in which a classic full-scale OSD can be drawn into the image, as you are used to from the analog world.
The Avatar Micro kit uses a pair of LHCP antennas connected via a u.FL connector for transmission. The video transmitter can be powered by a voltage of 6-25V (2-6S). When feeding directly from 6S batteries, a capacitor of at least 47uF/50V must be used at the input. The transmitter has an internal 8GB memory, to which it is possible to record images from the camera. For easy installation in the copter, the video transmitter has holes with a pitch of 25.5x25.5mm M2. The camera is the size of a Micro. It is connected to the video transmitter by a 14 cm long cable. The aspect ratio is switchable 4:3/16:9. The lens is used M12 2.1mm.
Key Features
- Camera size: Micro - 19x19x22mm
- Sensor: 1/2.7"
- Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
- Aspect ratio: 4:3 / 16:9
- FOV: 170°
- Lens: 2.1mm M12
- Camera weight: 6g
- Coax. cable: 140mm
- Frequency band: 5725-5850GHz
- Transmit Power: FCC:<30dBm;CE:<14dBm
- Mounting holes: 25.5x25.5mm M2
- Size: 33x33x9.5mm
- Internal memory: 8GB
- Weight of the video transmitter: 16g
- Power supply: 6-25V
- Antenna connector: u.FL
Package Includes
- 1x Camera
- 1x Video transmitter
- 2x Antenna
- 1x 4-pin USB cable
- 1x Power cable
- 1x Set of screws
