Varnish PVB 16 100ml

Varnish PVB 16 is a coating designed to protect printed circuit boards from external influences. It insulates electronics and protects them from water, corrosion, acids, and alkalis. PVB varnish is especially suitable for protecting control units, ESCs, video transmitters, and other electronics by forming a thin coating. You can solder through the coating without issues. The varnish is applied as a spray and dries in 10–15 minutes. Operating temperature range: -50 to +150 °C.

Technical Datasheet

SAFETY WARNING

Labelling according to Regulation (EC) No. 1272/2008 (CLP). This product contains substances classified as hazardous under Regulation (EC) No. 1272/2008.

GHS02 - Flammable substances GHS05 - Corrosive to metals GHS07 - Irritants

Signal word: DANGER

Hazard statements:

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Precautionary statements:

• P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Pressurized container: Do not pierce or burn, even after use.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER or doctor.
• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Safety Data Sheet (EN) and other languages