ToolkitRC M6DAC 2x 200/350W

€ 150,79

ToolkitRC M6DAC is a small dual channel charger with integrated 200W power supply. The charger can be powered by 230V from the mains, from a DC power source or an external battery (7-28V). When powered from an external source, the full potential of the charger can be used to charge up to 350W per channel and up to 15A. The charger can charge not only classic Lipo batteries, but also LiHV, LiFe, Lion, NiMh or Pb. It can also be switched to laboratory power supply mode, where the output voltage and current are adjustable. In this mode, you can also charge smart batteries, such as those from DJI. The charger also has a USB-C connector with 65W fast charge for charging your phone, laptop or HD camera.

The dual-channel charger can connect two independent batteries and charge each according to different parameters. The maximum power per channel is 350W. The charger can also be operated in synchronous mode, where both channels of the charger are used to charge one battery. In this case, the battery can be charged with a power of up to 700W and a current of up to 25A. When the charger is powered from the mains, however, the power is limited by the 200W integrated power supply.

The charger is controlled by a metal roller. All charging information is displayed on a 3.5" IPS display with a resolution of 480x320 pixels. The charger must not be powered from an AC power source and a DC power source at the same time.

English manual

Key Features

  • Power supply : 100-240V AC / 7-28V DC (max 30A)
  • Charging power: 200W (AC) / 2x 350W 0.1-15A or 1x 700W 0.1-25A (DC)
  • Battery types: Lipo, LiHV, LiFe, Lion 1-6S, NiMh 1-16S, Pb 1-10S
  • Balancing current: 1A 
  • Balancing accuracy < 0.005V
  • Discharge power: 15W
  • USB-C: 65W 3.25A@20V
  • USB-C protocols: PD, QC, AFC, FCP, SCP, PE, SFCP, VOC
  • Size: 127x106x57mm
  • Weight: 520g

Package Includes

  • 1x Charger