Matek F405-Wing V2
Matek F405-Wing V2 is a control unit designed primarily for airplanes and single wing. The board also includes a PDB(power distribution board) for power distribution from the battery to the board and controllers. Also included is a current sensor(220A), 5/6/7.2V 5A BEC for servos, 9/12V 2A for video transmitter, camera or gimbal, and 5V 2A BEC for RC receiver, camera, buzzer, GPS, LEDs and other electronics. A 3-6S Lipo battery can be used to power the board. The Matek F405-Wing V2 features a ICM42688-P gyro, barometer, OSD for analog video, SD card slot, 6 UARTs, 2x I2C bus and 10 PWM outputs. The iNav 6.0 or later firmware (MATEKF405SE) or ArduPilot 4.4 or later (MATEKF405-Wing) can be used to control the model.
The MATEKF405-Wing consists of a total of 3 boards, with the top and bottom boards only for better installation. All necessary electronics are in one board only.
Key Features
- Power supply: 3-6S (9-30V)
- MCU: STM32F405RGT6, 168MHz , 1MB Flash
- IMU: ICM42688-P
- Baro: DPS310
- OSD: AT7456E
- Blackbox: SD card slot
- Number of UARTs: 6, 1x Softserial (iNav)
- PWM outputs: 10
- I2C: 2x
- ADC: 3x (Voltage Sensor, Current Sensor, RSSI)
- Current Sensor: 220A (INAV scale 150, ArduPilot 66.7A/V)
- BEC: 5/6/7.2V@5A, 5V@2A, 9/12V@2A
- Mounting holes: 30.5x30.5mm M3
- Size:54x36x13mm
- Weight: 25g
Package Includes
- 1x Matek F405-Wing
- 1x Pin rail
