HOTA P6 2x300W

The HOTA P6 600W DC is a dual-channel charger designed not only for LiPo batteries. The charger does not include a built-in power supply and is powered via an XT60 connector with DC input voltage in the range of 10.5–30V. It can therefore be powered by a large battery or an external power supply. The HOTA P6 is designed to fit together with the HOTA T240 power supply (sold separately), forming one compact unit.

With two independent channels, the P6 can charge two batteries simultaneously – each at up to 300W. It also supports synchronous mode, allowing both channels to be combined for charging a single battery at up to 500W. The HOTA P6 supports all common cell types such as NiCd, NiMH, LiPo, Li-ion, LiHV, and others. In addition to standard charging, it also supports balancing and discharging. Internal discharge is limited to 12W, but with an external load, it can discharge at up to 300W per channel.

The charger is equipped with a servo port, which can be used to test servos and RC receivers. The HOTA P6 can measure PWM signals, test servos, and output PPM signals.

Thanks to the USB-A (5V/2.1A) and USB-C (45W) outputs, it can also charge additional devices such as FPV goggles, RC transmitters, or action cameras. The 2.4" color display with a resolution of 320×240 pixels clearly displays all necessary information. With its compact dimensions of 111×70×45 mm and weight of 292 g, it is ideal for use in the field or while traveling.