Heewing Cruza T2 - parts are original manufacturer replacement parts for the Heewing T2 Cruza FPV airplane with a 1200mm wingspan. They are suitable for repairs after a crash or hard landing, as well as for replacing worn parts. They are sold in three variants, each containing a package of parts for a different section of the airplane – canopy covers, horizontal tailplane, or main wing. The parts match the shape of the original factory parts.
The Hatch parts bag variant (manufacturer code T2-027) includes the front and rear canopy covers, a plastic cover handle, and a handle retaining clip. The covers enclose the electronics compartment in the fuselage. The handle is inserted from above through the opening in the front cover and secured from below with the clip, as shown in the airplane manual.
The Horizontal tail parts bag variant (T2-026) is a replacement horizontal tailplane with elevator. In addition to the foam part, it includes a plastic tailplane mount, a quick-release button, and screws (7x 2,6x8mm and 4x 2x6mm). The T2 Cruza has a quick-release elevator that slides out when the button is pressed, allowing the tailplane to be replaced quickly and the airplane to be easily disassembled for transport.
The Wings accessories bag variant (T2-024) includes a pair of main wing foam parts (left and right) made of gray EPP foam and 3 pairs of covers marked RⅠ–RⅢ and LⅠ–LⅢ, which cover the bays on the underside of the wing. The wings feature integrated split flaps („split flaps“) and a prepared cutout at the root for the quick-release plate.
The packages include only the parts listed for the respective variant. Servos, control horns and pushrods, carbon spars, the wing quick-release plate, wiring, and electronics are not included and must be transferred from the original parts during repair or purchased separately.