Happymodel Mobula 7 is a small Tinywhoop with digital image transmission DJI O4, providing image transmission in fullHD quality and allowing recording on board up to 4K resolution. With protected props and a low weight (38g without battery), flying with it is relatively safe. It is powered by RS1102 10000Kv motors combined with a 45mm three-blade HQProp propeller and a 2S battery. The flight is managed by an AIO board Happymodel CrazyF405 HD, featuring a controller with F405 processor, BMI270 gyro, a barometer for altitude measurement, 8MB blackbox memory, 12A ESCs with Bluejay firmware, voltage and current sensor, and an integrated UART ELRS receiver at 2.4GHz with a wire antenna.
Recommended batteries are 2S with a capacity of 450-650mAh with an XT30 connector. The battery space is 17x13mm.
The drone is designed for calm indoor flight. Due to the heavier O4 unit and 2S battery, the drone is not suitable for faster outdoor flying, as it does not have sufficient power for that.
The item has been opened. The drone is like new and shows no signs of use.
Key Features
- Controller: Happymodel CrazyF405 HD AIO
- MCU: STM32F405
- Gyro: BMI270
- Barometer: BMP280
- Blackbox: 8MB
- ESC: 12A Bluejay
- BEC: 5V@1A
- Receiver: integrated UART ELRS 2.4GHz
- RC antenna: wire
- Video transmission: DJI O4
- Motors: 1102 10000Kv
- Shaft size: 1.5mm
- Prop size: 45mm
- Battery connector: XT30
- Recommended batteries: 450-650mAh 2S
- Weight: 38g (without battery)
Package Includes
- 1x Drone
- 1x Spare prop set
- 1x Spare canopy
- 1x Cross screwdriver
- 1x Prop removal tool
Videos
