GEPRC Vapor-D5 is a 5" freestyle drone supplied without video transmission. It is designed for the digital image transmission DJI O4 Pro. The drone is supplied in PNP version; DJI O4 Pro, RC receiver and GPS module are not included and need to be added from your own stock.
Vapor D5 is in a Deadcat configuration, with the front arms shifted further back and outward. This prevents the distracting propeller edges from being visible in the camera, which is especially important if you use the DJI O4 camera for filming as well. The frame uses 5mm thick arms. The arms are mounted with two screws, so their replacement in case of damage is very easy. The FPV camera is protected by aluminum side plates. The camera mounting itself is solved with a rubber insert, which helps absorb vibrations. The drone is equipped with plastic side plates that protect the electronics from dirt.
Vapor-D5 is equipped with the GEP-F722-HD V2 flight controller featuring an F722 processor, ICM42688-P gyro, BMP280 barometer for altitude measurement and 16MB blackbox memory. The board is complemented by 60A ESCs with BlHeli_S firmware. Propulsion is provided by GEPRC SpeedX2 2407E 1960Kv motors in combination with Gemfan 5136 propellers.
Recommended batteries are 6S with a capacity of 1300-1800mAh and XT60 connector
Key Features
- Video transmission: ready for DJI O4 Air Unit Pro (not included)
- Motor-to-motor diagonal: 238 mm
- Arm thickness: 5 mm
- Electronics protection: plastic side plates
- Propeller size: 5" (Gemfan 5136)
- Flight controller: GEP-F722-HD V2
- MCU: STM32F722
- Gyro: ICM42688-P
- Barometer: BMP280
- Blackbox: 16 MB
- ESC: TAKER H60_BLS 60A 4in1 (BLHeli_S)
- Motors: GEPRC SPEEDX2 2207E 1960Kv
- Propellers: Gemfan 5136
- Power connector: XT60
- RC receiver: PNP (not included)
- Weight: 405 g ±5 g (without RC receiver, without battery and video unit)
Package Includes
- 1x Vapor-D5 WTFPV drone
- 2x Pair of Gemfan 5136 propellers
- 2x Anti-slip battery pad
- 1x Set of spare screws
- 2x M20×250 mm battery strap
- 1x 1.5 mm L-wrench
- 1x 2.0 mm L-wrench
- 1x 3.0 mm L-wrench
- 1x GoPro mount
- 1x GPS mount
- 1x Vapor side panel
