GEPRC Vapor D5 O4 Pro - 6S ELRS with GPS

GEPRC Vapor-D5 is a powerful 5" freestyle drone with digital image transmission DJI O4 Pro. The drone is suitable for acrobatics or flying with an HD camera such as GoPro. Vapor D5 is in a Deadcat configuration, where the front arms are shifted further back and out to the sides. This means the distracting propeller edges, are not visible in the camera, which is especially important if you also use the DJI O4 camera for recording. The frame uses 5mm thick arms. The arms are mounted with two screws and their replacement in case of damage is therefore very easy. The FPV camera is protected by aluminum side plates. The camera mount itself is solved via a rubber insert, which helps absorb vibrations. The drone is equipped with an M10 GPS module, which enables automatic return to the takeoff point.

Vapor-D5 is equipped with the GEP-F722-HD V2 flight controller with an F722 processor, ICM42688-P gyro, BMP280 barometer for altitude measurement and 16MB blackbox memory. The board is complemented by 60A ESCs with BlHeli_S firmware. Propulsion is provided by GEPRC SpeedX2 2207E 1960Kv motors in combination with Gemfan 5136 propellers. Video transmission is provided by the aforementioned DJI O4 Pro unit. The drone is equipped with an ERLS receiver with one antenna at a frequency of 2.4GHz.

Recommended batteries are 6S with a capacity of 1300-1500mAh.

Important notice: The DJI O4 camera uses a new generation of gyros, which are more sensitive to vibrations. This may affect the proper functionality of RockSteady and Gyroflow stabilization.