GEPRC Cinelog30 V3 O4 Pro - 4S ELRS

Geprc Cinelog30 V3 is a 3" Cinewhoop for 4S batteries with DJI O4 Pro digital video transmission. Cinelog30 is equipped with an ELRS receiver on 2.4GHz. The Cinewhoop is intended especially for flying with a lightweight HD camera such as a Naked GoPro, or without a camera, recording directly on the DJI O4 Pro unit. The drone has ducted propellers, which increase safety when flying indoors or near people. The prop guards also serve as protection for the flight controller against dirt. A LED strip is installed in the plastic prop guards for a unique look. The drone is equipped with Geprc PDB, which combines the receiver mount, buzzer, BEC for LEDs, protective TVS diode, and anti-spark.

The DJI O4 Pro camera is mounted via rubber softmounts, which minimize the amount of transmitted vibrations and thus ensure smooth video suitable even for later stabilization in Gyroflow. Power is provided by 1404 3850Kv motors in combination with HQProp DT76mm propellers and a 4S battery with an XT30 connector. The Cinelog30 V3 is designed as a lightweight Cinewhoop. A suitable capacity is therefore around 650-750mAh. The weight of the drone without battery is approx. 187g. At its core is an AIO board with an F722 processor and 45A ESCs Geprc Taker F722 45A. The frame is cut from 2.5mm thick carbon. 

Important notice: The DJI O4 camera uses a new generation of gyroscopes, which are more sensitive to vibrations. This may affect the proper functionality of RockSteady and Gyroflow stabilization.