Seeker 3.5 is a powerful smaller freestyle drone for 3.5" propellers. The Seeker is equipped with top-notch image transmission DJI O4 Pro. It is suitable for flying outdoors in meadows or larger gardens. The frame is in the shape of a Deadcat, with the camera placed in front of the arms, so the edges of the propellers are not visible in the camera's image. The drone has a mount for an external action camera and a GPS module that enables automatic return to the launch point. The image also displays information about speed, altitude, and distance. The FPV camera is secured in aluminum side plates, which protect the camera. Sensitive electronics are covered with plastic side plates. The packaging includes orange side plates and a spare black side plates. At the rear, there is a fixed XT60 connector that eliminates the possibility of the battery cables being cut by the propellers. The ELRS receiver operating at 2.4 GHz is mounted externally on the frame in a plastic housing. This makes it easily accessible while also being protected. On the bottom, there is a buzzer for easy locating of the drone in tall grass. Next to the camera, there is an external USB-C connector for easy setup of the flight controller. For high durability, the arms are machined from 4mm thick carbon fiber.
Flight is ensured by Aether 2006 2550Kv motors, which combined with Gemfan 3630 propellers and a 6S battery provide more than enough power. The drone uses a Mini sized stack. The flight controller uses an F722 processor and an ICM42688 gyro. It features 16MB memory for blackbox and a barometer for altitude measurement. It is complemented with 40A 32-bit ESCs.
Recommended batteries are 6S with a capacity of 1000–1200 mAh.