On Tuesday, 17 November, we are closed due to a public holiday. Orders will be shipped on 18 November. Thank you for your understanding.

BetaFPV P1 HD VRX Nano

In Stock
€ 102,29

BetaFPV P1 HD VRX Nano is a compact receiver for the ArtLynk digital video transmission system that plugs directly into the goggle module bay. This allows existing analog goggles to be converted to digital HD video without buying new goggles or using a bulky external receiver.

ArtLynk is an open digital HD video transmission system for FPV. Thanks to a common standard, air units, FPV goggles and receiver modules from different manufacturers are mutually compatible. The system includes brands such as BetaFPV, HGLRC, SkyZone and TJRC. ArtLynk transmits video in 1080p at 60fps with latency of around 60ms and offers a significantly cleaner and more stable image compared to analog transmission. It is an affordable alternative to DJI and Walksnail for pilots who want HD quality without the closed ecosystem of a single brand.

The receiver is available in two enclosure sizes depending on the variant. For SKYZONE SKY04L, SKY04X, SKY04O, SKY04X PRO and SKY04O PRO and for Fatshark HDO+, HDO2, HDO, AttitudeV6, Dominator HD3, Dominator V3. Video is not routed to the goggles through the module bay pins, but via a short mini HDMI cable included in the package; the goggles display video through their HDMI input. It weighs 33g without antennas. The module is actively cooled by a fan.

Video is received by two antennas in the 5.3-5.8GHz band. Two modes are available: normal with 3 channels (5758, 5788 and 5828MHz) and race with 16 channels in the 5340-5917MHz range, which can help avoid interference from Wi-Fi networks, for example. The channel menu allows signal strength to be measured on all channels at once. The transmission bitrate is up to 25Mbps, with a manufacturer-rated range of over 400m. At the bottom of the image is an OSD bar with telemetry — current channel, drone and receiver battery voltage, transmission speed, distance from the air unit, link status and SD card status.

DVR recording is handled directly by the receiver rather than the goggles — it records to a microSD card (up to 1TB, the manufacturer recommends U3/V30 class). The slot is on the rear of the module and is accessible only after removing it from the goggles, but the card can also be read via USB-C when connected to a computer without removing the module. We recommend stopping recording after the flight by pressing the Record button again, otherwise the file may not be saved. Control is provided by a 5-way joystick (5D), Back button and Record button; pairing with the air unit is started using the Bind menu item. The menu can also be used to set the transmit power and bitrate of the air unit and its camera parameters. Firmware is updated from the microSD card directly through the menu. P1 V2 firmware is not compatible with the V1 series, so the air unit and receiver must use the same firmware generation.

It is powered externally via a 2-pin PH2.0 connector; a power cable is included. The built-in buzzer alerts to low voltage (below 5.5V for 2S, or when an individual cell drops below 3.5V for multi-cell batteries). Important warning: for the beta version, the manufacturer allows power only from a 2-4S battery; a 6S battery may damage the receiver. The beta version (V1.0.3) can be powered directly from the goggles after connecting the solder pads; this modification requires a SKYZONE goggle firmware update, and no external power source may be connected afterwards. The procedure is described in the manufacturer's manual.

Firmware

Key Features

  • Input voltage: 5.5-26.4V (beta version 2-4S only)
  • Power connector: PH2.0 2-pin
  • System: ArtLynk - Artosyn KAP (5.8GHz)
  • Compatible Skyzone goggles: SKY04L, SKY04X, SKY04O, SKY04X PRO, SKY04O PRO
  • Compatible Fatshark goggles: HDO+, HDO2, HDO, AttitudeV6, Dominator HD3, Dominator V3
  • Video output: mini HDMI
  • Transmission resolution: 1080p@60fps
  • Transmission bitrate: up to 25Mbps
  • Latency: approx. 60ms
  • Channels: 3 (normal) / 16 (race)
  • Frequency range: 5.3-5.8GHz
  • EIRP: CE <14dBm / FCC <23dBm
  • Range: over 400m
  • Antennas: 2x (5.8GHz)
  • SD card: microSD (max. 1TB, U3/V30), not included
  • Ports: USB-C, microSD, mini HDMI, PH2.0 2-pin
  • Controls: 5D joystick, Back, Record
  • Cooling: active fan
  • Size: 32x64x36mm (without antennas)
  • Weight: 33g (without antennas)

User Guides

Package Includes

  • 1x P1 HD VRX Nano receiver 
  • 2x 5.8GHz antenna
  • 1x Power cable
  • 1x Mini HDMI - mini HDMI cable
  • 2x Cable organizer