Axisflying Cineon C35 V3 O4 Pro - 6S TBS with GPS

Axisflying Cineon C35 V3 is a 3.5" Cinewhoop for 6S batteries with digital video transmission DJI O4 Pro. Cineon C35 is equipped with a TBS Crossfire receiver on the 868MHz frequency. The Cinewhoop is designed especially for flying with an HD camera such as GoPro or without a camera with recording directly on the DJI O4 Pro unit. Thanks to the large 2006 motors and 3.5" propellers, the drone has enough power even for fast outdoor flying. The drone has ducted propellers, which increase safety when flying near people. The propeller guard also acts as a cover for the flight controller and other electronics against dirt. A LED strip is installed in the plastic propeller guard for a unique look. The drone also includes a GPS module, which enables automatic return to the launch point. You also have an overview of the current speed and distance from the launch point. The USB-C connector from the flight controller is located at the front of the drone for easy access.

The power is provided by the mentioned Axisflying C206 1960Kv motors in combination with HQProp DT90mm propellers and a 6S battery with an XT60 connector. Suitable capacity is 1050-2000mAh. The drone weight without battery is approx. 400g. At its core is the Axisflying F745 AIO board with an F745 processor and 40A ESCs with AM32 firmware.

Important notice: The DJI O4 camera uses a new generation of gyroscopes that are more sensitive to vibrations. This may affect the proper function of RockSteady and Gyroflow stabilization.