Axisflying Cineon C35 V3 H743 O4 Pro - 6S ELRS with GPS

Axisflying Cineon C35 V3 is a 3.5" Cinewhoop for 6S batteries with digital video transmission DJI O4 Pro. Cineon C35 is equipped with an ERLS receiver on the 2.4GHz frequency. The Cinewhoop is intended especially for flying with an HD camera such as GoPro or without a camera with recording directly to the DJI O4 Pro unit. Thanks to the large 2006 motors and 3.5" propellers, the drone has enough power even for fast outdoor flying. The drone has ducted propellers, which increase safety when flying near people. The propeller guard also serves as protection for the flight controller and other electronics against dirt. An LED strip is installed in the plastic propeller guard for a unique look. The drone also includes a GPS module, which enables automatic return to the takeoff point. You also have an overview of the current speed and distance from the takeoff point. The USB-C connector from the flight controller is located on the top of the drone in the frame for easy access.

Propulsion is provided by the mentioned Axisflying C206 1960Kv motors in combination with HQProp DT90mm propellers and a 6S battery with an XT60 connector. The drone weight without battery is approx. 400g. At its core is the Argus H743 AIO board with an STM32H743 processor and 45A ESCs with AM32 firmware.

Important notice: The DJI O4 camera uses a new generation of gyroscopes, which are more sensitive to vibrations. This may affect the proper functioning of RockSteady and Gyroflow stabilization.