Axisflying Cineon C35 V3 O4 Pro - 6S ELRS with GPS

Axisflying Cineon C35 V3 is a 3.5" Cinewhoop for 6S batteries with DJI O4 Pro digital video transmission. The Cineon C35 is equipped with an ERLS receiver on 2.4GHz. The Cinewhoop is designed mainly for flying with an HD camera such as a GoPro or without a camera with recording directly on the DJI O4 Pro unit. Thanks to the large 2006 motors and 3.5" propellers, the drone has enough power even for fast outdoor flying. The drone has ducted propellers, which increase safety when flying near people. The propeller duct also serves as a cover for the flight controller and other electronics against dirt. An LED strip is installed in the plastic propeller duct for a unique look. The drone also includes a GPS module, which enables automatic return to the takeoff point. You also have an overview of the current speed and distance from the takeoff point. The USB-C connector from the flight controller is located at the front of the drone for easy access.

The propulsion is provided by the mentioned Axisflying C206 1960Kv motors in combination with HQProp DT90mm propellers and a 6S battery with an XT60 connector. Recommended capacity is 1050-2000mAh. The weight of the drone without battery is approx. 400g. At its core is the Axisflying F745 AIO board with F745 processor and 40A ESCs with AM32 firmware.

Important notice: The DJI O4 camera uses a new generation of gyroscopes, which are more sensitive to vibrations. This may affect the proper functionality of RockSteady and Gyroflow stabilization.