BetaFPV Air65 Racing - 1S ELRS

Air65 is a lightweight 1S Tinywhoop designed for racing and freestyle flying in indoor environments. The drone uses 31mm propellers and has a motor-to-motor diagonal of 65 mm. With an extremely low weight of around 17 g, it is completely safe to fly even indoors at home or in the office.

The core of the drone is the modern AIO unit BETAFPV Air 1S 5-in-1, which combines the flight controller, ESC, ELRS receiver, and analog video transmitter with an integrated OSD chip into a single board. The G473 processor paired with the ICM42688P gyro ensures precise control and smooth flight. The built-in VTX supports output power from 25–400 mW and uses the SmartAudio protocol for easy configuration. The drone comes equipped with a C03 camera offering 1200 TVL resolution, 160° FOV, and a 4:3 aspect ratio. The camera is protected by a lightweight and flexible Air Canopy with an adjustable tilt angle of 25–50°. The integrated ELRS receiver operates on 2.4 GHz, is connected via UART, and uses a wire antenna.

The BETAFPV 0702SE II 27000KV motors paired with Gemfan 1219-3 propellers deliver plenty of power for aggressive flight performance. To minimize weight, the motors are soldered directly onto the AIO board. The Air65 frame is made from durable lightweight plastic and weighs only 2.67 g.

Air65 is the perfect choice for experienced pilots seeking maximum speed, agility, and control in the lightest possible form factor.

The LiPo battery fits into a frame slot measuring 11.4×6.2 mm. The drone is equipped with a BT2.0 connector.

Recommended batteries are 1S LiPo with a capacity of around 300 mAh. Batteries are not included.

CLI and firmware