iFlight Succex Mini F4 + 35A Fly Tower

SKU: succexmini
On the way - Oct 20, 2019
€ 69,99

The SucceX Mini F4 + 35A Fly Tower is a flight controller designed for maximum installation comfort and extreme performance. In the "mini" stack with a 20x20mm hole spacing category, it is one of just a few few FCs suited to 2-6S LiPo cells. The stack consists of an F4 processor and a proven MPU6000 gyro in combination with 4in1 controllers rated at 35A of continuous load. The connection of the controller to the control unit is solved without the need to solder: via pin bar. The entire stack is connected by steel screws to ensure that they are firmly aligned to avoid damage to the joint. The manufacturer also fastens the FC over rubber washers to facilitate filtering of vibrations.

Due to its dimensions, current capacities and power up to 6S, it is a full-featured stack not only for indoor racing copters, but also for full-fledged racing miniquads .

The stack is delivered completely assembled as you can see on product photos from the manufacturer.

V2 version includes current sensor and better videosignal filtering.

Key Features

SucceX mini F4 Flight Controller:
  • MCU: 100MHz STM32F405
  • IMU: MPU6000 gyro / accelerometer (SPI)
  • Integrated LC Filter
  • Power supply: 2-6S Lipo
  • OSD: BetaFlight OSD w / AT7456E chip
  • BEC Output: 5V @ 3A
  • Dimensions: 26x26mm plate, 20x20mm mounting holes (M2)
  • LED Output: Yes
  • Buzzer output: 5V buzzer

SucceX Mini 35A 2-6S 4 in 1 ESC:
  • MCU: STM32F051
  • Power supply: 2-6S LiPo
  • Mounting holes: 20x20mm, M2
  • Target: iFlight-BL32-4IN1
  • Constant current: 35 A
  • Short-term: 45A
  • Dimensions: 31x31mm (including power strips)
  • Mounting hole spacing: 20x20mm
  • Protocols: Dshot1200, Proshot, Oneshot, Multishot

Package Includes

  • Built-in SucceX Mini F4 + 35A Fly Tower stack
  • Complete accessories (cable set)