Runcam Hybrid 4K

Discontinued
€ 101,36

Runcam Hybrid is an FPV and HD camera  2in1. The camera consists of the camera itself and a board for a 20x20mm stack. The camera has two lenses and two chips, while one chip is used to record quality video up to 4K, the other is for FPV. The camera for FPV is a very well known Runcam Racer with a good dynamic range and a low latency of 6ms. The Runcam Hybrid can be connected to the control unit via a UART and controlled via Betaflight. This makes it easy to turn recording on / off using the switch on the transmitter. The HD camera is adjustable using QR codes.


The input voltage of the camera is 5-20V. Due to voltage peaks, the camera must be connected to the BEC. Do not connect the camera directly to a battery with 4 or more cells.

Key Features

  • Input voltage: 5-20V (do not connect directly to 4S battery)
  • HD sensor: Sony 8MP
  • FPV sensor: Sony 1.3MP
  • HD FOV: 145 °
  • FPV FOV: 150 °
  • HD lens: M10
  • FPV lens: M8
  • Supported resolutions: 4K @ 30fps / 2.7K @ 50-60fps / 1080p @ 50-120fps
  • Video format: MP4
  • Analog standard: PAL / NTSC switchable
  • Maximum SD card size: 128GB (U3)
  • Mounting hole spacing: 20x20mm
  • Board size: 29x29mm
  • Camera size: 19x25mm
  • Current consumption: 480mA @ 5V / 140mA @ 12V
  • Weight: 18g

Package Includes

  • 1x Camera
  • 1x Plastic cover
  • 1x Set of screws and cables

Videos